Like us on Facebook Follow us on Twitter
Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > STOVE PIPE & ACCESSORIES > PELLET PIPE FITTINGS
Sort By:
1
Pellet Pipe 243810 Storm Collar, 3 in Pipe, Galvanized Selkirk 243520 Wall Bracket, 3 in Selkirk 243430 Tee Support, For Use with VP Pellet Pipe, 3/4 in
Our Price: $4.59
Our Price: $16.99
Our Price: $16.99
Pellet Pipe 243810 Storm Collar Selkirk 243520 Wall Bracket Selkirk 243430 Tee Support
Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly. For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3" from wall. UL Listed. Type L pellet vent. Can be used to support either a 3" or 4" diameter tee installation. UL Listed.
Selkirk 243502 Trim Plate, For Use with VP Pellet Pipe, 3 in Dia, Painted Black Pellet Pipe 243800 Vertical Termination Stove Pipe Cap 8 in OD, Galvanized Selkirk A 243825 Adjustable Pellet Vent Roof Flashing, Galvanized Steel
Our Price: $16.99
Our Price: $24.99
Our Price: $25.99
Selkirk 243502 Trim Plate Pellet Pipe 243800 Vertical Termination Stove Pipe Cap 8 in OD Selkirk A 243825 Adjustable Pellet Vent Roof Flashing
Used to finish off the bottom (ceiling) side of a floor/ceiling penetration or on the outside wall as a exterior shield. Over-all size is 12-1/2" x 12-1/2". UL Listed. Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL Listed. Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed.
Selkirk 243243 Adjustable Pipe Connector, 3 in Pellet Pipe 243803 Exit Stove Pipe Cap 5-3/4 in L, Galvanized Pellet Pipe 243805 Horizontal Termination Stove Pipe Cap 8 in OD, Galvanized
Our Price: $25.99
Our Price: $35.99
Our Price: $42.99
Selkirk 243243 Adjustable Pipe Connector Pellet Pipe 243803 Exit Stove Pipe Cap 5-3/4 in L Pellet Pipe 243805 Horizontal Termination Stove Pipe Cap 8 in OD
Adjustable pipe connector will connect to 3" appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3" VP pipe, elbow or tee. UL Listed. Exit Cone Cap is designed to direct flue gases perpendicular to the wall and to increase their velocity, projecting them further away from the building. UL Listed. Horizontal Termination Cap is designed specifically for use on installations in which the Type L vent terminates in a horizontal orientation on the outside of a structure. UL Listed.
Pellet Pipe 243230 Type L Vent Stove Pipe Elbow, 3 in, 90 deg, 570 deg F, Galvanized Pellet Pipe 243246 Insulated Type L Chimney Adapter, 3 in 6 in H, Galvanized Pellet Pipe 243460 Wall Thimble, 3 in, Galvanized, 5 - 9 in Wall Thickness
Our Price: $42.99
Our Price: $44.99
Our Price: $44.99
Pellet Pipe 243230 Type L Vent Stove Pipe Elbow Pellet Pipe 243246 Insulated Type L Chimney Adapter Pellet Pipe 243460 Wall Thimble
Type L vent systems for pellet stove applications.Used to orient pipe between vertical and horizontal orientation. Rated for flue temperatures up to 570 degrees F. Model VP may be installed with a minimum 1" air space clearance to combustible surfaces, framing lumber, drywall, and plywood. UL Listed. Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system. Type L Pellet Vent Wall Thimble must be used in all thru-the-wall installations involving combustible construction. UL Listed.
Selkirk 243410 Ceiling Support, For Use with Support Pellet Pipe From the Ceiling Joist, 3 in Dia Pellet Pipe 243248 Insulated Type L Chimney Adapter, 3 in 8 in H, Galvanized Pellet Pipe 243100 Stove Pipe Tee With Cap, 3 in, Galvanized
Our Price: $44.99
Our Price: $52.99
Our Price: $54.99
Selkirk 243410 Ceiling Support Pellet Pipe 243248 Insulated Type L Chimney Adapter Pellet Pipe 243100 Stove Pipe Tee With Cap
Type L pellet vent ceiling support/firestop. Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system. Type L Air Insulated Pellet Vent Tee with Cap designed for use in changing the orientation of the vent from horizontal to vertical and making inspection and cleaning of pellet stove system easier. UL Listed.
Selkirk 283870 Thru-The-Wall Stove Vent Kit, 8 Pieces
Our Price: $299.99
Selkirk 283870 Thru-The-Wall Stove Vent Kit
For pellet and corn appliances. Kit contains: 3" horizontal cap, 3" 90 degree elbow, 3" wall bracket, (5) 3" one-foot pipe lengths, 3" tee with cleanout, 3" wall thimble, and 3" pipe connector. System rated for flue temperatures up to 570 degrees. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel, outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103.
   
 
1