Like us on Facebook Follow us on Twitter
Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > THREAD SEALANT COMPOUNDS
Sort By:
1
Harvey 030005-144 Pipe Thread Compound, 1-1/4 oz Pack, Off-White Solid Stick RectorSeal T Plus 2 23710 Multi-Purpose Pipe Thread Sealant, 1.75 oz, Tube, White, Paste RectorSeal No. 5 25790 Multi-Purpose Pipe Thread Sealant, 1.75 oz, Tube, Yellow, Paste
Our Price: $2.79
Our Price: $3.99
Our Price: $4.59
Harvey 030005-144 Pipe Thread Compound Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Rectorseal 25790 Pipe Thread Sealant
Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Plumb Pak PP854-2 Pipe Joint Compound, 2 oz, Tube Brass Craft PS1087 Seal-N-Check Gas Kit, Greenish/Yellow Plumb Pak PP854-1 Teflon Pipe Thread Sealant, 1 oz, Tube
Our Price: $4.59
Our Price: $5.99
Our Price: $5.99
Plumb Pak PP854-2 Pipe Joint Compound Brass Craft PS1087 Seal 'N Check Kit Plumb Pak PP854-1 Pipe Thread Sealant
Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing
   
 
1