Like us on Facebook Follow us on Twitter
Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > CPVC FITTINGS
Sort By:
1 2 3
Genova 51476 Solvent Weld Tube Reducing Tee, 3/4 x 1/2 x 3/4 in, Slip, CPVC Genova 53056 Tube Wing Elbow, 90 deg, 1/2 in, Slip, 400 psi at 73 deg F, 100 psi at 180 deg F, CPVC Genova 50465/TCA-0500 Transition Adapter, 1/2 in, Spigot, CPVC
Our Price: $0.79
Our Price: $0.89
Our Price: $0.99
Genova 51476 CPVC Fitting Genova 53056 CPVC Fitting Genova 50465/TCA-0500 CPVC Fitting
Used to provide a branch supply line from a main line. Reduces to smaller pipe size. Used to change direction in piping and features lugs for fastening. Often used in conjunction with No.530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a Drop Ear elbow. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule.
Genova 53055 Tube Wing Elbow, 90 deg, 1/2 in, Slip x FIP, 400 psi at 73 deg F, 100 psi at 180 deg F, CPVC Genova 50467/TCA-0750 Transition Adapter, 3/4 in, Spigot, CPVC Genova 50705CP Tube Elbow, 90 deg, 1/2 in, Slip, 400 psi at 73 deg F, 100 psi at 180 deg F, CPVC
Our Price: $1.39
Our Price: $1.69
Our Price: $1.99
Genova Products 53055 CPVC Wing Elbow Genova 50467/TCA-0750 CPVC Fitting Genova 50705CP CPVC Fittings
Adapts from 1/2" CPVC to 1/2" male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2" CPVC riser to shower arm. Sometimes called a Drop Ear elbow. Hand tighten only; seals by means of a special elastomeric gasket to ensure leakproof seal, use of joint compound or Teflon tape is neither necessary or recommended. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule. SLIP X SLIP Used to change direction in piping.
Genova 53128 Hose Adapter, 1/2 x 3/4 in, CPVC x Hose Genova 50105CP Tube Coupling, 1/2 in, Slip, CPVC Genova 50107CP Tube Coupling, 3/4 in, Slip, CPVC
Our Price: $2.19
Our Price: $2.59
Our Price: $2.99
Genova 53128 CPVC Fittings Genova 50105CP CPVC Fitting Genova 50107CP CPVC Fittings
Solvent welds directly into 1/2'' CPVC fitting socket and adapts to female hose coupling. Used to join straight lengths of CPVC tubing. Used to join straight lengths of CPVC tubing.
Genova 50707CP Tube Elbow, 90 deg, 3/4 in, Slip, 400 psi at 73 deg F, 100 psi at 180 deg F, CPVC Genova 51405CP Solvent Weld Tube Tee, 1/2 in, Slip, CPVC Cap Cpvc 1/2 in - Case of 10
Our Price: $3.29
Our Price: $3.49
Our Price: $3.49
Genova 50707CP CPVC Fittings Genova 51405CP CPVC Fittings Epc 50155 Tube Cap
SLIP X SLIP Used to change direction in piping. Used to provide a branch supply line from a main line. Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
Genogrip 53010 Tube Reducing Adapter, 1/2 x 3/8 in, Slip x Tubing, CPVC Elbow 90deg Street Cpvc 1/2 - Case of 10 Coupling Cpvc 3/4x1/2 - Case of 10
Our Price: $3.79
Our Price: $3.79
Our Price: $3.79
Genova 53010 Genogrip CPVC Fittings Genova 52905 CPVC Fitting Genova Products 50175 CPVC Coupling
Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" O.D. PEX tubing or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through floor to 3/8" O.D. closet or lavatory riser tubes. Can also be used with metal risers. Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. Used to join straight lengths of CPVC tubing to smaller size tubing.
Bushing Cpvc 3/4x1/2 in - Case of 10 Genova 50405CP Pipe to Tube Adapter, 1/2 in, MIP x Slip, CPVC KBI TFS Pipe Transition Adapter, 1/2 in, FPT X Hub, 100 psi, CPVC
Our Price: $3.99
Our Price: $3.99
Our Price: $3.99
Genova 500 Pipe Reducing Bushing Genova 50405CP CPVC Fittings KBI TFS Pipe Transition Adapter
Used to reduce from fitting socket to CPVC tubing. Bagged. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel.
KBI TPC-0500 Pipe to Tube Adapter, 1/2 in, Pex X CTS, 100 psi, 180 deg F, CPVC/Stainless Steel Genova 500 Solvent Weld Joints Pipe Union With Metal Bracket, 1/2 in, Slip X Slip, CPVC Genogrip 53070 Tube Reducing Street Adapter, 1/2 x 1/4 in, Spigot x Tubing, CPVC
Our Price: $4.59
Our Price: $4.59
Our Price: $4.59
KBI TPC-0500 Pipe to Tube Adapter Genova 500 Solvent Weld Joints Pipe Union With Metal Bracket Genova 53070 Genogrip CPVC  Red Street Adapter
Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F. Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting. Allows any fitting hub to be reduced to accept PEX, copper or CPVC tubing
KBI TMS-0500 Pipe to Tube Adapter, 1/2 in, MNPT X CTS, 400 psi, 180 deg F, CPVC/Stainless Steel, Tan Genova Genogrip 500 Angle Tube Adapter, 1/2 X 3/8 in, Slip X Tubing, CPVC Elbow 90deg Cpvc 1/2 - Case of 20
Our Price: $4.59
Our Price: $4.79
Our Price: $4.79
KBI TMS-0500 Pipe to Tube Adapter Genova Genogrip 500 Angle Tube Adapter Genova Products 50705 CPVC 90 Degree Elbow
Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel. Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" OD Pex or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through the wall to 3/8" OD closet and/or lavatory riser tubes. Can also be used with metal risers. SLIP X SLIP Used to change direction in piping.
KBI TFS Pipe Transition Adapter, 3/4 in, FPT X Hub, 100 psi, CPVC KBI TMS-0750 Pipe to Tube Adapter, 3/4 in, MNPT X CTS, 400 psi, 180 deg F, CPVC/Stainless Steel, Tan KBI TPC-0750 Pipe to Tube Adapter, 3/4 in, Pex X CTS, 100 psi, 180 deg F, CPVC/Stainless Steel
Our Price: $4.99
Our Price: $4.99
Our Price: $4.99
KBI TFS Pipe Transition Adapter KBI TMS-0750 Pipe to Tube Adapter KBI TPC-0750 Pipe to Tube Adapter
Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel. Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F.
Cap Cpvc 3/4 in - Case of 10 KBI DE-0500-S Pipe Elbow, 90 deg, 1/2 in, CTS Hub X FIPT, Stainless Steel Genova 50407CP Pipe to Tube Adapter, 3/4 in, MIP x Slip, CPVC
Our Price: $4.99
Our Price: $4.99
Our Price: $5.69
Epc 500 Tube Cap KBI DE-0500-S Pipe Elbow Genova 50407CP CPVC Fittings
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged. 90 degree elbow. CPVC/304 stainless steel technology with internal "knurl" and EDM. O'ring insuring reliability and integrity. Meets/exceeds all ASTM and ANSI standards. Made with Ever TUFF CPVC. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer.
   
 
1 2 3