Like us on Facebook Follow us on Twitter
Home > ELECTRICAL > SPECIALTY ELECTRICAL > TOOLS & TESTERS > GREENLEE SPECIALTY TOOLS/ACCES
Sort By:
1 2
Greenlee DTAP1/4-20 Right Hand Drill/Tap/Countersink Bit With Web Thinning, 1/4-20 NC, 1/4 in Greenlee DTAP10-24 Right Hand Drill/Tap/Countersink Bit With Web Thinning, NO 10-24 NC, 1/4 in Greenlee DTAP8-32 Right Hand Drill/Tap/Countersink Bit With Web Thinning, NO 8-32 NC, 1/4 in
Our Price: $9.99
more info
Our Price: $9.99
more info
Our Price: $9.99
more info
Greenlee DTAP1/4-20 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP10-24 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP8-32 Right Hand Drill/Tap/Countersink Bit
Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.
Greenlee DTAP10-32 Right Hand Drill/Tap/Countersink Bit With Web Thinning, NO 10-32 NF, 1/4 in Greenlee DTAP12-24 Right Hand Drill/Tap/Countersink Bit With Web Thinning, NO 12-24 NC, 1/4 in Greenlee 60A-3/4 Stubby Quick Change Auger Bit, 3/4 in Dia x 4-1/2 in OAL
Our Price: $9.99
more info
Our Price: $9.99
more info
Our Price: $11.99
more info
Greenlee DTAP10-32 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP12-24 Right Hand Drill/Tap/Countersink Bit Greenlee 60A-3/4 Stubby Quick Change Auger Bit
Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Shorter for better access to tight spaces between studs and joists, will drill 2' and 4' joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5" (144mm) weight .3 lb. (118g). 1/4" hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
Greenlee 1941-1 Cutter Blade, For Use with 6A646 BX Flexible Metal Conduit Cutter, Hardened Steel Greenlee 84012 Conical Anchor Kit, 100 Pieces, Plastic Greenlee 60A-1 Stubby Quick Change Auger Bit, 1 in Dia x 4-1/2 in OAL
Our Price: $11.99
more info
Our Price: $11.99
more info
Our Price: $14.99
more info
Greenlee 1941-1 Cutter Blade Greenlee 84012 Conical Anchor Kit Greenlee 60A-1 Stubby Quick Change Auger Bit
Replacement blade for Greenlee 0952-01 or 1940 flexible metal conduit cutter. Contains 100 anchors, 100 screws and a 1/4" masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use. Shorter for better access to tight spaces between studs and joists, will drill 2' and 4' joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5" (144mm) weight .3 lb. (118g). 1/4" hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
Greenlee 430-500 Spiral Wrap Tracer Poly Twine Dispenser, 210 lb, Plastic, Green Greenlee 301A Key Hole Jab Saw, 6 in L, Clog-Free Greenlee 125Q Small Pulling Grip with Swivel D Versigrip, 1/2 in
Our Price: $19.99
more info
Our Price: $19.99
more info
Our Price: $19.99
more info
Greenlee 430-500 Spiral Wrap Tracer Poly Twine Dispenser Greenlee 301A Key Hole Jab Saw Greenlee 125Q Small Pulling Grip with Swivel D Versigrip
Poly line, 210 lb. average breaking strength, can be blown into conduit and then used to pull in a larger pulling rope, or it can be used directly to pull in smaller wires. Can be used directly from the container with power fishing systems. Resists tangling when dispensing. Prepunched hole for dispensing the line. Rot and mildew resistant. Keyhole saw with integrated blade and ergonomic handle design provides maximum strength. Hardened steel blade with clog-free teeth, handle with non-slip grip. Pointed tip easily punches through drywall. Blade cuts on both on push and pull strokes. Hole in handle for lanyard or convenient storage. Tool is not insulated. 11-5/8" overall length. For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting.
D'Versibit 712P Placement Tool Greenlee 150Q Medium Pulling Grip with Swivel D Versigrip, 3/4 in Greenlee 438-5H Fish Tape, 1/8 in Width 0.045 in Blade, 50 ft Reel, Steel
Our Price: $22.99
more info
Our Price: $25.99
more info
Our Price: $29.99
more info
D'Versibit 712P Placement Tool Greenlee 150Q Medium Pulling Grip with Swivel D Versigrip Greenlee 438-5H Fish Tape
Allows placement of the drill bit at any point within the wall.  Helps in judging where the bit will be during drilling to avoid accidentally drilling through the wall. Use to position all bit and shaft sizes, vertical and horizontal. For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting. Steel fish tape in self-tensioning impact-resistant rewinder case with dirt-free tape finish. .045" thick, 2.75 pounds.
Nail Eater 66PT-3/4 Extreme Auger Bit 3/4 in Dia x 18 in OAL, Heat Treated Steel, 15 in Flute Greenlee 168Q Large Pulling Grip with Swivel D Versigrip, 3/8 in Greenlee Textron GT-16 Voltage Testers, Non-Contact
Our Price: $31.99
more info
Our Price: $32.99
more info
Our Price: $32.99
more info
Nail Eater 66PT-3/4 Extreme Auger Bit 3/4 in Dia x 18 in OAL Greenlee 168Q Large Pulling Grip with Swivel D Versigrip Greenlee Textron GT-16 Voltage Testers
Cutting edge is hardened for longer life. Self-feeding screw point draws bit through wood even after multiple sharpenings. Made of high quality carbon alloy steel; cuts through nails and provides up to 3 times longer life. Overall length 18". Hex shank: 7/16" (11.1mm). Weight: 1.5 lb, (681g). For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting. Pen size, fits into pocket or tool pouch. Detects power and voltage without touching the bare conductor. For use on power wiring plus lighting, thermostats and other low voltage circuits. Use to detect voltage in outlets, fixtures, wires and cables. Finds breaks in wires. Identifies hot and neutral conductors. Low battery indication. Voltage detection: AC 5-1000 volts. Frequency: 50-500Hz. Measurement category CAT IV, 1000 volts. Includes two 1.5 volt AAA batteries.
Greenlee DM-25 Digital Multimeter, 600 VAC/DC 1.5 V/9 V Battery Nail Eater 66PT-7/8 Extreme Auger Bit 7/8 in Dia x 18 in OAL, Heat Treated Steel, 15 in Flute Quick Cutter 6923 Adjustable Recessed Lighting Hole Saw, Carbide Tip
Our Price: $35.99
more info
Our Price: $35.99
more info
Our Price: $44.99
more info
Greenlee DM-25 Digital Multimeter Nail Eater 66PT-7/8 Extreme Auger Bit 7/8 in Dia x 18 in OAL Quick Cutter 6923 Adjustable Recessed Lighting Hole Saw
Use to measure voltage and check batteries, measure current of small electronic circuits. 600 volt AC/DC voltage. Resistance measurement. 1.5 volt/9 volt battery test. Continuity and diode tests. Built-in test leads and a rubber boot to protect meter from damage. 9 volt battery included. Measurement category: CAT III, 600 volt. ETL approved. Cutting edge is hardened for longer life. Self-feeding screw point draws bit through wood even after multiple sharpenings. Made of high quality carbon alloy steel; cuts through nails and provides up to 3 times longer life. Overall length 18". Hex shank: 7/16" (11.1mm). Weight: 1.5 lb, (681g). Fits a 3/8" drill chuck and can be used with a cordless drill. Cuts perfect holes in drywall and ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Included dust shield virtually eliminates flying dust and debris.
Greenlee Textron TK-30A Electrical Tester Kits, 3-Piece, With Carrying Case Greenlee Textron DTAPKIT Electrician'S Drilling/Tapping Tools, 6-Piece Sets D'Versibit 09-03-54B Combination Type B Auger Bit 9/16 in Dia x 54 in OAL, Spring Steel
Our Price: $47.99
more info
Our Price: $49.99
more info
Our Price: $49.99
more info
Greenlee Textron TK-30A Electrical Tester Kits Greenlee Textron DTAPKIT Electrician'S Drilling/Tapping Tools D'Versibit 09-03-54B Type B Auger Bit 9/16 in Dia x 54 in OAL
Three core products - the DM-25 manual ranging multimeter to measure voltage and check batteries, the GT-10 polarity cube to trouble shoot 120 volt AC grounded outlets and the GT-11 non-contact voltage detector for use in outlets, lighting fixtures, circuit breakers, wires and cables. Comes with a durable carrying case for storage and added protection. Drill/tap high-speed steel 6-32 to 1/4-20 six piece drill/tap set, split point. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.Quick change adaptor included. For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood. Hole in bit for attaching pulling grip. With screw point removed, this bit can be ground to function like a standard combination bit.
Flex Splitter 1940 Conduit Cutter, 14/2 - 10/4 AWG, 3/8 in Kwik Stepper 34403 Multi-Hole Step Drill Bit, 1/4 - 13/16 in Dia x 3-5/16 in OAL, 3/8 in, 12 1/8 in Step, 2 Greenlee 540-12 Wire Pull Fish Stick 4 ft, 12 ft Reel, Fiberglass
Our Price: $54.99
more info
Our Price: $57.99
more info
Our Price: $59.99
more info
Flex Splitter 1940 Conduit Cutter Kwik Stepper 34403 Multi-Hole Step Drill Bit Greenlee 540-12 Wire Pull Fish Stick 4 ft
Cuts metal conduit in seconds with a few turns of the crank and a twist of the conduit. Ample clearance between handle and body. Set conduit size for multiple cuts of the same size. No need to reset. Set blade adjustment with only a screwdriver. In-handle blade storage holds up to five spare blades. Weighs 4 pounds. Capacity: 14/2 to 10/4 BX 3/8" flexible metal conduit. Split tip design penetrates through steel faster, resisting walking or skidding even on round surfaces. Balanced, double-flute construction of these bits require less pressure. Designed and manufactured in USA. Hole sizes for No.36414 (SKU 149.9490): 7/8", 1-1/8", 1.201", 1-7/32", 1-1/2", 1-3/8". Hole sizes for No.34403 (SKU 361.4450): 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8". Bullet nose and "J" hook threaded tips, packaged in clear plastic tube. 12' (3- 4' sections) kit. Highly visible 1/4" diameter green fiberglass rods. 200 pounds minimum pulling strength. Sections can be threaded together and are easy to see when working above ceilings, down walls, or under raised floors. Comes in a tube.
D'Versibit 12-04-54A Type A Auger Bit 3/4 in Dia x 54 in OAL, Spring Steel Greenlee FTS438-125BP Fish Tape, 1/8 in Width 1/16 in Blade, 125 ft Reel, Steel D'Versibit 16-04-54A Type A Auger Bit 1 in Dia x 54 in OAL, Spring Steel
Our Price: $62.99
more info
Our Price: $62.99
more info
Our Price: $64.99
more info
D'Versibit 12-04-54A Type A Auger Bit 3/4 in Dia x 54 in OAL Greenlee FTS438-125BP Fish Tape D'Versibit 16-04-54A Type A Auger Bit 1 in Dia x 54 in OAL
Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval. Hole in bit for attaching pulling grip. Kwik Silver plated fish tape, same strength as conventional steel tape, corrosion resistant, smooth plated to make it easier to fish with. High-impact nylon, one-piece handle with large handle grip. Self-tensioning, wide, impact-resistant rewinder case with viewports to ensure tape fit, and retaining strap on inside to hold tape secure. 400 pounds maximum design strength. .060" thick - 5 pounds. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval. Hole in bit for attaching pulling grip.
   
 
1 2