Like us on Facebook Follow us on Twitter
Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
Sort By:
1 2
Halex 16010B Ground Clamp, 1/2 - 1 in, Zinc Alloy Gardner Bender GGS-1512R Ground Screw, 3/8 in Eritech CP58 Acorn Standard Duty Ground Clamp, 1/2 - 5/8 in, Silicone Bronze
Our Price: $1.79
Our Price: $2.19
Our Price: $2.59
Halex 16010B Ground Clamp Gardner Bender GGS-1512R Ground Screw Eritech CP58 Acorn Standard Duty Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Green round washer head screw for switch and outlet boxes. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
Halex 93591 Ground Clamp, 1/2 in, Bronze Eritech ZWP1J Grounding Pipe Clamp, 1/2 - 1 in, Die Cast Zinc Gardner Bender GGC-1508 Ground Clip
Our Price: $2.59
Our Price: $2.79
Our Price: $2.79
Halex 93591 Ground Clamp Eritech ZWP1J Grounding Pipe Clamp Gardner Bender GGC-1508 Ground Clip
Connects grounding wire to the grounding rod. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. For aluminum or copper grounding wire zinc plated.
Gardner Bender GGP-1502 Grounding Pigtail, 12 SOL Gardner Bender 14-GRC Ground Clamp, 1/2 - 1 in Halex 36010 Ground Clamp, 1/2 - 1 in, Bronze
Our Price: $2.99
Our Price: $3.29
Our Price: $3.49
Gardner Bender GGP-1502 Grounding Pigtail Gardner Bender 14-GRC Ground Clamp Halex 36010 Ground Clamp
AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. Connects grounding wire to the grounding rod. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Eritech CWP1J Grounding Pipe Clamp, 1/2 - 1 in, Silicone Bronze Halex 93592 Ground Clamp, 5/8 in, Bronze Halex 36019 Ground Clamp, 1/2 - 1 in, Bronze
Our Price: $3.99
Our Price: $4.59
Our Price: $5.39
Eritech CWP1J Grounding Pipe Clamp Halex 93592 Ground Clamp Halex 36019 Ground Clamp
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Square D PK7GTACP Ground Bar Kits, Aluminum, 7 Terminals Eritech CWP1JU Grounding Pipe Clamp, 1/2 - 1 in, Silicone Bronze Halex 63299 Ground Screw, NO 10-32 x 1/2 in, Steel
Our Price: $5.69
Our Price: $5.99
Our Price: $6.49
Square D PK7GTACP Ground Bar Kits Eritech CWP1JU Grounding Pipe Clamp Halex 63299 Ground Screw
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
Schneider PK9GTACP Ground Bar Kit, 30 - 400 A, 9 Terminal, Aluminum/Copper Square D PK12GTACP Ground Bar Kits, Aluminum, 12 Terminals Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug, 15 Terminal, 14 - 4 AWG Copper/Aluminum
Our Price: $6.99
Our Price: $6.99
Our Price: $6.99
Schneider PK9GTACP Ground Bar Kit Square D PK12GTACP Ground Bar Kits Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
Eritech 811260UPC Grounding Rod, 1/2 in Dia x 6 ft L, Steel, Galvanized Cutler-Hammer GBK10P Ground Bar Kits, 10 Terminals Eritech EK17 Direct Burial Perpendicular Ground Clamp, 1/2 - 1 in, Bronze Alloy
Our Price: $7.59
Our Price: $7.59
Our Price: $7.99
Eritech 811260UPC Grounding Rod Cutler-Hammer GBK10P Ground Bar Kits Eritech EK17 Direct Burial Perpendicular Ground Clamp
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed.
Halex 36020 Ground Clamp, 1-1/4 - 2 in, Bronze Square D PK15GTACP Ground Bar Kits, Aluminum, 15 Terminals Schneider PK18GTACP Ground Bar Kit, 30 - 400 A, 18 Terminal, Aluminum/Copper
Our Price: $7.99
Our Price: $7.99
Our Price: $7.99
Halex 36020 Ground Clamp Square D PK15GTACP Ground Bar Kits Schneider PK18GTACP Ground Bar Kit
Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Cutler-Hammer GBK14P Ground Bar Kits, 14 Terminals Erico CC58 Threadless Compression Coupler, Silicon Bronze Square D PK23GTACP Ground Bar Kits, Aluminum, 23 Terminals
Our Price: $8.69
Our Price: $8.99
Our Price: $8.99
Cutler-Hammer GBK14P Ground Bar Kits Erico CC58 Threadless Compression Coupler Square D PK23GTACP Ground Bar Kits
Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength silicon bronze. Coupling is tapered, so when the rod is driven into the coupling the two parts compress to form a conductive connection. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Eritech 615840UPC Grounding Rod, 5/8 in Dia x 4 ft L, Copper Siemens Energy ECGB10 Ground Bar Kits, 10 Taps Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug, 30 Terminal, 14 - 4 AWG Copper/Aluminum
Our Price: $8.99
Our Price: $8.99
Our Price: $9.99
Eritech 615840UPC Grounding Rod Siemens Energy ECGB10 Ground Bar Kits Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
   
 
1 2