Like us on Facebook Follow us on Twitter
Home > ELECTRICAL > LIGHTING & CEILING FANS > FLUORESCENT FIXTURES & PARTS > FLUORESCENT FIXTURES-DECOR
Sort By:
1
MOUNT PLATE 4IN STRIP LIGHT ETI 54242102 Led Shop Light Fixtures, Linkable, N/A Watt/Volt Metal Bracket for 8Ft Strip Light Retrofit
Our Price: $3.99
Our Price: $7.99
Our Price: $21.99
MOUNT PLATE 4IN STRIP LIGHT   LINK CORD 5FT SHOP/STRIP LIGHT MTL BRKT FOR 8FT STRP LT RTOFT
Junction box cover plate. 4 inch. For use with ETI linkable LED fixtures. Metal bracket used to retrofit 8' Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures.
Lithonia Lighting 676883 Fluorescent Utility Light, 22/32 W ETI 54263143 Led Shop Light Fixtures, Linkable, 10/120 Watt/Volt LIGHT WRAP FLUOR 2LAMP WHT 4FT
Our Price: $39.99
Our Price: $39.99
Our Price: $39.99
FIXTURE CIRC FLUSH 22/32W WHT LIGHT STRIP 2FT LINK LED 10W  LIGHT WRAP FLUOR 2LAMP WHT 4FT
Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations. Clear prismatic lens. Hook and latch lens simplifies lamp replacement. Residential electronic ballast. General wrap, T8/32W. Energy Star.
LIGHT WRAP 2LAMP WHITE 4FT STRIP LIGHT 2FT LED 20W 4000K Howard FSR84432ASEMV000I Fluorescent Retro Fit Kit, 120 - 277 V
Our Price: $52.99
Our Price: $57.99
Our Price: $59.99
LIGHT WRAP 2LAMP WHITE 4FT    STRIP LIGHT 2FT LED 20W 4000K Howard FSR84432ASEMV000I Fluorescent Retro Fit Kit
Premium clear prismatic lens. 120 volt residential electronic ballast. Easy removable diffuser for lamp replacement. Uses 32 watt lamps. Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified. Fluorescent strip channel retrofit kit to upgrade an existing 8? strip fixture into a newer and more efficient electronic T8 strip. Uses two (2) 4? gear trays that install independently for easy installation. Lampholder cutouts guarantee correct spacing and that lampholder will not fall out during install. Code gauge steel. High gloss, baked enamel finish. NEC compliant luminaire power disconnect standard. Contents: 2 gear trays with fully wired high efficiency instant start T8 ballast and lampholders, 12 tek screws, 4 gear tray tethers. Electronic ballast, inherent thermal protection, class P. 8' length, 4.25" width, uses 4 lamps, not included. 120-277 input volts. UL Listed.
ETI 54261143 Led Shop Light Fixtures, Linkable, 20/120 Watt/Volt Lithonia Lighting 153TX5 Fluorescent Recessed Troffer, 120 - 277 V, 32 W, 4 Lamp RETROFIT LED KIT WITH TUBES
Our Price: $59.99
Our Price: $62.99
Our Price: $69.99
LIGHT STRIP 4FT LINK LED 20W  FIXTURE TROFFER 4LIGHT 2FTX4FT RETROFIT LED KIT WITH TUBES
Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations. For use with T8 lamps, electronic ballasts and sockets. Smooth hemmed sides and inward formed end flanges for safe handling. Lighter weight fixture. Standard steel door frame with precision flush mitered corners, allows easy lens replacement without frame disassembly (for lenses up to .156" thick). Powder-painted, steel latches. Mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material UV stabilized. No asbestos is used in this product. Suitable for damp locations. UL Listed. Replacement for an older T12 or T8 8 foot strip light. Kit contains 4-4 foot LED tubes, 8 non shunted sockets and 1 metal retrofit kit. Integral driver bypasses the ballast. 15 watts per LED tube - (60 watts total). 120-277 volt, 1800 lumens per LED tube - (7200 lumens total), 5000K. Instant start down to -4 degreesF. 50,000 hours rated life. DLC and cUL certified.
WRAP LIGHT T8 4LAMP 4FT LIGHT WRAP FLUORESCENT T8 4FT STRIP LIGHT 4FT LED 40W 4000K
Our Price: $79.99
Our Price: $79.99
Our Price: $84.99
WRAP LIGHT T8 4LAMP 4FT       LIGHT WRAP FLUORESCENT T8 4FT STRIP LIGHT 4FT LED 40W 4000K
Premium clear prismatic lens. 120 volt residential electronic ballast. Easy removable diffuser for lamp replacement. Uses 32 watt lamps. Premium clear prismatic lens. 120 volt residential electronic ballast. Easy removable diffuser for lamp replacement. Uses 32 watt lamps. Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified.
   
 
1